XERO 110V Booster Pump
XERO 110V Booster Pump
- 1/2 Unit of Horsepower
- Get better flow into your purification system
- Includes a GFCI on the 15' power cord
- Built on a powder-coated steel frame
There's nothing worse than showing up to a job and realizing the pressure out of the spigot is trash. Instead of having to revert to traditional cleaning, you can add a booster pump to your set up.
Booster pumps are designed to go between your purification system and the tap. It will increase the flow of water into your purification system which then increases the output.
These pumps should never be put after your purification system.
This pump is built on a powder-coated steel frame and includes a GFCI to ensure safe operation. XERO includes durable brass fittings on the build for a long lifespan.
1. Connect your garden hose from your source water to the inlet. The inlet has female garden hose threads.
2. Connect a separate garden hose from the pump to your purification system. The outlet has male garden hose threads.
Typically you'll be connecting the outlet hose to the inlet of your pure water system at the pre-filter.
3. Be sure to turn on the water BEFORE you plug in the pump.
4. Once you confirm water is flowing, you can turn on the XERO 110V Booster Pump.
Your new XERO 110V Booster Pump is covered for 1 year. If you run into an issue, just fill out the simple form and we'll make it right!
You can fill out the XERO Warranty Form with some details about your purchase and the issue so we can get it resolved.
Does this have a pressure switch or does the pump run all the time no matter whether you are using water or not?
Hi, great question! The 110v Booster does not have a pressure switch, it always needs to have water running through it in order for it to be "on" !
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}